LDP Transmissions

Our stage 2 build is rated at 650RWHP.  It is designed for trucks with stock(or mild) turbo and injectors wanting to run max effort tunes, trucks that tow heavy loads or those that do both. This build is paired perfectly with a stage 1 63.5mm turbo and a super sport(or sportsman) CP3 and a small set of injectors. The stage 2 trans comes standard with a factory stall triple disc converter and is available with 4 stall choices for additional money.  

* L5P Stage 2 units start at $5899 with 1058 billet triple disc *

Includes: 

LDP exclusive Suncoast overhaul kit

LML C3/4 pistons and return springs 

SUNCOAST exclusive SCZ C3/4 clutches w/ kolene coated steels

New bushings and thrust bearings 

New internal wiring harness

New C5 clutches

Ratio tek pump spring, Transgo shift kit and Transgo or modified tc lock up valve

Add sleeved C2 hub (700HP rating) +$200

Add  LDP billet flex plate (street builds up to 1000hp)- $449 

*ARP flexplate bolts(required if changing flex plate)- $74.95

TORQUE CONVERTER OPTIONS(2001-16):

Suncoast Category 1 triple disc 2000 rpm stall w/ cast stator- standard option

Suncoast 1058 billet stator 2200-2300 rpm stall +$200 Towing/daily driver

Suncoast 1055-2 billet stator 25-2600 rpm stall +$200 Daily/Race Good for larger fixed vane turbos

Suncoast 105X billet stator 1800 rpm low stall +$200 Towing converter

Suncoast 1074 billet stator 2200-2300 rpm stall +$350 * effeciency and performance!

Suncoast 107X billet stator 1800 rpm low stall +$350 *excellent for towing and efficiency!

   L5P Converter options:

1058 2200-2400RPM stall Included 

107X 1900-2000 rpm low stall +$200

1074 2300-2400 rpm stall +$200

 DEEP PANS AND PTO COVERS:

OEM Allison deep pan (RAW)- $125 

MAG-HYTEC deep pan- $359.99 Add custom powder coat +$125+

LDP billet pto covers- $129
 

Our Stage 3 build is rated for 750+RWHP(2001-10) AND 850+(LML/L5P)- billet parts added to handle higher hp goals. The Stage 3 build is for street trucks with modified turbos and fuel system upgrades and customers wanting to drag race or sled pull. The stage 3 includes Suncoast billet stator triple disc converter with your choice of stall.

* L5P units- $7299

Includes: 

LDP exclusive Suncoast overhaul kit

LML C3/4 pistons and return springs 

SUNCOAST exclusive SCZ C3/4 clutches w/ kolene coated steels

Suncoast billet C2 hub

Suncoast billet Stator triple disc torque converter of choice of stall up to 3200 rpm

New bushings and thrust bearings

New internal wiring harness

New C5 clutches

Built to your HP level- pump and valve body set up as needed for application.

Painted case.

New solenoids +$630

New OEM pump +$399(recommended for 2005 and older models or trucks with 200,000+ miles)

New OEM pressure switch manifold +$130

DEEP PANS AND PTO COVERS:

OEM Allison deep pan (RAW)- $125 

MAG-HYTEC deep pan- $359.99 Add custom powder coat +$125+

LDP billet pto covers- $129 

Billet hard parts :

Suncoast billet input shaft- $769(2001-16) *L5P $849

Suncoast billet intermediate shaft- $575

Suncoast billet output shaft- $755(2001-10) $755(2011 up)

Suncoast Billet P2 planet fix $925

P2 carrier & C2 hub w/ modified P1 sun gear- $1699 (competition builds over 750hp/ street builds over 850hp)

LDP billet flex plate (street builds up to 1000hp)- $449

Suncoast billet flex plate assembly (competition builds over 650hp)- $815

Socal Diesel L5P billet flex plate- $799

ARP flex plate bolts- $95.99

Our Stage 5 comp build is an all billet competition unit built for 1000+RWHP street trucks or 850+RWHP drag and sled pull trucks. Our comp units are built to order and set up for your specific needs and useage. 1 year warranty on comp builds!

* L5P Comp units $10299

Includes: 

LDP exclusive Suncoast overhaul kit

LML C3/4 pistons and return springs

Suncoast SCZ non-slotted C3/4 clutches with kolene coated steels 

Suncoast billet triple disc w/ choice of stall 

Billet input shaft

Billet output shaft

Billet intermediate shaft

Billet 6 pinion P2 carrier/C2 hub

Pump and valve body calibrated for competition use and hp level  

New bushings and thrust bearings

New OEM pump

New internal wiring harness

New OEM solenoids

New C5 clutches

Stainless steel hardware and painted case 

Optional add-ons and upgrades:

DEEP PANS AND PTO COVERS:

OEM Allison deep pan (RAW)- $125 

MAG-HYTEC deep pan- $359.99 Add custom powder coat +$125+

LDP billet pto covers- $129 

Suncoast billet flex plate assembly- $799

ARP flex plate bolts- $74.95

LDP built 68RFE TOW build (500 Hp max)- 3 Year 100,000 mile warranty $6599

Includes:

Upgraded clutches throughout with added clutch count in od pack

New Thrust Washers

New Thrust Bearings

Billet Overdrive piston 

Billet 2C Piston

Transgo 200psi valve body kit

LDP reman pump assembly

Upgraded low/reverse sprag

LDP built upgraded pump assembly

Upgraded accumulator

New Stamped steel pan 

Suncoast Guardian dual disc torque converter

LDP Stage 1 650HP Street/tow 68RFE build- 3 Year 100,000 mile warranty $8999

Includes:

Sonnax Smart Tech Overdrive Drum Assembly

Billet input shaft

New Thrust Washers

New Thrust Bearings

Billet Overdrive piston 

Upgraded 2C Clutch Set

Billet 2C Piston

Transgo 200psi valve body kit

LDP built upgraded pump assembly

Upgraded low/reverse sprag

New OEM solenoid pack

Upgraded accumulator pistons

MAG-HYTEC deep pan or equivalent pan

Suncoast triple disc torque converter with choice of 2000 or 2200rpm stall

Optional add on of a Revmax billet OD hub +$900

LDP Suncoast Category 1(400hp)Tow build-3 year 100,000 mile warranty! $4749!

Includes:

Raybestos GPZ forward frictions with steels

Raybestos GPZ direct clutches with steels

10 Raybestos overdrive clutches with steels

Custom machined overdrive pressure plate

.073 custom snap ring for forward clutch pack

High flow 48RE transmission filter

Front pump bushing

Raybestos Pro Series carbon fiber flex band

Suncoast Pan Gasket

SunCoast 48RE paper/rubber/gasket kit

New thrust washers

SunCoast Billet accumulator piston

4.4 billet band lever

Billet band strut

Billet band anchor 

Upgraded GM gov solenoid

Transgo shift calibration kit w/ LDP built valve body

New solenoids and harness

Includes SunCoast Billet single disc low-stall towing torque converter

Add MAG-HYTEC pan(4 extra quarts) +$349.99

LDP Stage 2  450hp HD Tow build-3 year 100,000 mile warranty! $5699!

Includes:

Raybestos GPZ forward frictions with steels

Raybestos GPZ direct clutches with steels

10 Raybestos overdrive clutches with steels

Custom machined overdrive pressure plate

.073 custom snap ring for forward clutch pack

High flow 48RE transmission filter

Front pump bushing

Raybestos Pro Series carbon fiber flex band

Suncoast billet input shaft

Suncoast Pan Gasket

SunCoast 48RE paper/rubber/gasket kit

New thrust washers

SunCoast Billet accumulator piston

4.4 billet band lever

Billet band strut

Billet band anchor 

Upgraded GM gov solenoid

Transgo shift calibration kit w/ LDP built valve body

New solenoids and harness

Includes Suncoast 2000 rpm category triple disc converter

Add MAG-HYTEC pan(4 extra quarts) +$349.99

LDP Stage 3 550hp Street/tow Build $6799- 3 year 100,000 mile warranty!
Includes:

6 Raybestos GPZ direct clutches and 6 Raybestos direct clutch steels
4 Raybestos GPZ forward frictions w/ Kolene Steels
10 overdrive direct frictions w/ Kolene steels
6 Overdrive brake frictions w/ Kolene steels
SunCoast custom billet 2nd gear band
SunCoast custom billet band strut
SunCoast custom billet band anchor
SunCoast custom billet accumulator piston
SunCoast custom billet forward clutch piston
SunCoast custom billet direct clutch piston
SunCoast custom billet 2nd gear servo
SunCoast custom custom direct clutch springs 

Sonnax billet od piston retainer
SunCoast gasket and sealing kit
New front pump bushing
Upgraded GM governor pressure solenoid
Transgo shift calibration kit
Upgraded valve body electronics
New bushings and thrust washers
Billet Input Shaft
Billet Flexplate

Includes Suncoast category triple disc converter
 

Upgrade to Suncoast Billet stator triple disc w/ choice of stall +$300 ($7099)

Add MAG-HYTEC pan(4 extra quarts) +$349.99

LDP Stage 4 650hp street/strip build $8299- 3 year 100,000 mile warranty!
Includes:

Alto & Raybestos GPZ clutches w/ kolene steels
SunCoast custom billet 2nd gear band
SunCoast custom billet band strut
SunCoast custom billet band anchor
SunCoast custom billet accumalator piston
SunCoast custom billet forward clutch drum and piston
SunCoast custom billet direct clutch piston
SunCoast custom billet 2nd gear servo
SunCoast custom custom direct clutch springs 

Sonnax billet od piston retainer
SunCoast gasket and sealing kit
New front pump bushing
Upgraded GM governor pressure solenoid
Transgo shift calibration kit
Upgraded valve body electronics
New bushings and thrust washers
Billet Input Shaft

Billet ouput shaft
Billet Flexplate

Includes Suncoast Billet stator triple disc w/ choice of stall 

Add MAG-HYTEC pan(4 extra quarts) +$349.99

LDP 47/48re street and competition builds will be quoted upon request due to variations and options based on usage and power level. Competition builds for 750+hp start at $8900-$10,999 and are available with full manual valve body or auto shifting valve body.